Product Overview

BDCOM P5916 Series, whichhas high reliability, highly dense EPON access and robust switching and routingabilities, is a new generation of broadband and multiservice access OLT devicesoriented towards the service-integrated network.

BDCOM P5916 Seriesadopts the BDROS operating system whose intelligent property is owned by BDCOM,integrates with Ipv6, network security, EPON, supports data, voice and video,and provides continuous forwarding, graceful restarting and ring protection,improving the work efficiency and securing the maximum running time.

BDCOM P5916 Seriessupports 2 slots for console panels, 2 GE slots and 12 gigabit slots. P5916 Seriesalso supports the console board and the “1+1” backup of power supply. P5916 Seriescan be widely applied in Telecom operators, FTTX of the broadcast and TVoperators, automatic power distribution, power-consumed information collectionand FTTH in the electric power industry.

Product Characteristics

● BDCOM P5916Series abides by IEEE802.3ah standard andmeets relevant requirements of EPON OLT regulated in TechnicalRequirements of "YD/T1475-2006 and China Telecom EPON Technical Requirements.

● BDCOM P5916Series is cabinet modularized device with highdensity and large capacity so they are easy for expansion and upgrade.

● BDCOM P5916Series has L2/L3/L4 functions, supports 768Gbps backplane bandwidth, staticroutes, RIP, OSPF and so on. BDCOM P5916 Series supports advanced functionssuch as QoS, bandwidth control and multicast, adding extra values to the wholenetwork.

● BDCOM P5916Series has high reliability. The key modules of the system like the controlunit and the power supply can be backed up through the “1+1” mode. Meanwhile,the Hitless Protection System (HPS) secures the high reliability of P5916 Series.After the redundancy control module is configured, the highest reliability canbe reached.

● A singleEPON card of BDCOM P5916 Series supports 4 EPON ports. BDCOM P5916, therefore,supports up to 48 EPON ports, a maximum optical coupling ratio of 1:64, up to3584 ONUs and a 20km transmission distance.

● P5916 Series supports various interface typesincluding GE, TE and EPON.

● BDCOM P5916Series supports CTC standard, automatic detection and is compatible with ONUsfrom different manufacturers.

● BDCOM P5916Series supports the RFC 1213SNMP protocol. The internal network management mode adopts the Telnet-basedconfiguration management or the SNMP-based configuration management, realizinguniform network management based on the Broad Director network managementplatform.

Items	Description
System Capacity	Maximum coupling ratio, 1:64 768G backplane bandwidth 2 slots for console panels, 2 GE service slots and 12 gigabit service slots MAC capacity: 64K
Interface	Max number of 10GE ports	4
	Max number of GE ports	48
	Maximum number of PON ports	48
PON Interface	Uplink and downlink symmetric transmission rate: 1.25Gbps Supporting standard EPON modules, such as PX20, PX20+, PX20++; Security: ONU authentication mechanism
Standard	IEEE802.3ah YD-T 1475-2006 access network requires EPON basis YD-T 1771-2008 access network requires EPON intercommunication China Telecom EPON standard CTC2.1/3.0 IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP IEEE 802.3ad LACP Ethernet – II
QoS	Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) IEEE 802.1p, CoS WR, SP and FIFO Limiting the uplink/downlink rate based on each ONU Supporting DBA and SLA
VLAN	Port-based VLAN QinQ, support flexible QinQ
Layer 3 function	Supporting static routing, Ripv1/v2, OSPF, etc.
Multicast	IGMP Snooping Controllable multicast
Reliability	Unidirectional Link Detection (UDLD) Hot swap of the service board and power supply module Optical path protection of EPON Abnormal luminescence overhaul of ONU, such as long luminescence detection
Network Security	Limiting the maximum number of users on each port Port isolation Packet storm control Flow-based ACL access control function Transmission data encryption on the PON interface
Configuration Management	Multiple management modes such as CLI, Web, SNMP and TELNET Conducting software upgrade through TFTP Command prompt in English or in Chinese Debug output
Physical Characteristics	Dimensions mm (W×D×H) : 399.2 x315 x 482.6
	Installation: standard 19-inch rack-mounted
Environment Requirements	Working condition: 0℃-45℃; 10%-85% non-condensing
	Storage condition: -40℃-80℃; 5%-95% non-condensing
Power Supply	Input voltage: AC90-264V, DC 36~72V Dual power supply, DC/AC power supply and power module hot swap Overcurrent voltage protection

Chassis of BDCOM P5916 Series
P5916	Chassis of BDCOM P5916 Series (dual power supply, 12 gigabit service slots, 2 10GE uplink service slots, 2 slots for switching engines (backup each other))
Power Supply of BDCOM P5916 Series
LP59-PWR-AC	AC Power Supply of P5916 Series (AC 90-264V input voltage, 360W max power)
LP59-PWR-DC	DC Power Supply of P5916 Series (DC 36-72V input voltage, 360W max power)
Chassis of BDCOM P5916 Series
LP5916-MSU-II-C	The II-style MSU of P5916 Series OLT
GE Service Line Card of BDCOM P5916 Series
LP59-4PON-SFPB	4-port OLT EPON interface board, SFP interface (excluding the OLT SFP optical module)
LP59-4GE-TX/SFP	4-port gigabit uplink board (TX/SFP interface)
10GE Service Line Card of BDCOM P5916 Series
LP59-2TE-SFP+	2-port 10GE uplink board, SFP+ interface
EPON Optical Module
OLT-GSFP-20	OLT SFP module (PX20+, uplink and downlink 1.25G, TX wavelength 1490nm, RX wavelength 1310nm, SC interface)

О нас

Центр продуктов

Решения

Центр новостей

Служба поддержки

Контакт

Партнеры

Product Overview

Product Characteristics

© 2019 BDCOM - Connecting a Better World Sitemap Legal Notices Контакт